Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Araki, Shohei; Gunji, Satoshi; Arakaki, Yu; Yoshikawa, Tomoki; Murakami, Takahiko; Kobayashi, Fuyumi; Izawa, Kazuhiko; Suyama, Kenya
Proceedings of 12th International Conference on Nuclear Criticality Safety (ICNC2023) (Internet), 8 Pages, 2023/10
New experiments simulating fuel debris in the new criticality assembly, STACY, are designed to contribute to the validation of criticality calculations for criticality control of the fuel debris in the Fukushima Daiichi Nuclear Power Plant accident. In the new STACY experiment, a two-region core consisting of a driver region and a test region was investigated in order to configure a debris-simulated core with under-moderation condition (lattice pitch 1.27-cm) having the constraint of available fuel rod number. The test region with a 1.27-cm lattice pitch is surrounded by the driver region, in which fuel rods are arranged in a checkerboard pattern on a 1.27-cm lattice plate, with a 1.80-cm lattice pitch. Neutron spectra and sensitivity were calculated by using MCNP6 and ENDF/B-VII. The core which has a 17
17 test region with 373 fuel rods is the largest two-region core under the constraint. It was found that the core which has a 1717 test region can simulate the neutron spectra of under-moderation condition in a 1313 region inside the test region with the root-mean square percentage error of less than 5%. It was also confirmed that the sensitivity of 
Si and 
Ca (n,
) reactions when the concrete simulant, was loaded could be simulated.
Araki, Shohei; Gunji, Satoshi; Arakaki, Yu; Murakami, Takahiko; Yoshikawa, Tomoki; Hasegawa, Kenta; Tada, Yuta; Izawa, Kazuhiko; Suyama, Kenya
Proceedings of 4th Reactor Physics Asia Conference (RPHA2023) (Internet), 4 Pages, 2023/10
To conduct integrated thermal power measurements for the performance test of the modified STACY, we re-analyzed the experimental data measured in the solution fuel STACY using the activation method. We validated its feasibility under the limited number of activation detectors. The re-analyzed results of the activation method by using MVP and PHITS with JENDL-4.0 indicated that the effect of the difference of the position between activation detectors was small enough, and the results agreed with that of the fission product analysis within almost 10%. It is conceivable that the activation method could be adopted instead of the fission product analysis.
variations by nonuniform core configurationsGunji, Satoshi; Araki, Shohei; Suyama, Kenya
Nuclear Science and Engineering, 197(8), p.2017 - 2029, 2023/08
Times Cited Count：0 Percentile：0.01(Nuclear Science & Technology)The fuel debris generated by the accident at the Tokyo Electric Power Company's Fukushima Daiichi Nuclear Power Plant is expected to have not only heterogeneous but also nonuniform compositions. Similarly, damaged fuel assemblies remaining in the reactor vessels also have nonuniform configurations due to some missing fuel rods. This non-uniformity may cause changing neutron multiplication factors. The effect of non-uniformity on the neutron multiplication factor is clarified by computations, and the possibility of experimentally validating the computations used for criticality management is being investigated. For this purpose, in this study the criticality effects of several core configurations of a new critical assembly, STACY, of the Japan Atomic Energy Agency with nonuniform arrangements of uranium oxide fuel rods, concrete rods, and stainless-steel rods were studied to confirm benchmarking potential. The difference in these arrangements changed the neutron multiplication factor by more than 1 $. We confirmed that changes in local neutron moderation conditions and the clustering of specific components caused this effect. In addition, the feasibility of benchmark experimental cores with nonuniform arrangements is evaluated. If benchmarking of such experiments could be realized, it would help to validate calculation codes and to develop criticality management methods by machine learning.
Matsushita, Kentaro; Ezure, Toshiki; Imai, Yasutomo*; Fujisaki, Tatsuya*; Tanaka, Masaaki
Nihon Kikai Gakkai Kanto Shibu Ibaraki Koenkai 2021-Nendo Koen Rombunshu (Internet), 4 Pages, 2021/08
For evaluation of gas entrainment phenomenon at free surface in reactor vessel of sodium-cooled fast reactor, the gas entrainment evaluation tool named "Stream Viewer" has been developed. In Stream Viewer, depth of surface vortex dimple is predicted by calculating pressure decrease at the vortex center using velocity distribution around the vortex and Burgers vortex model. In this report, a method to identify continuous vortex center lines from a velocity distribution is newly developed. It becomes possible to evaluate three-dimensional distribution of pressure decrease along vortex center line. Then, the method is validated by applying Stream Viewer to an open channel experiment. As the result, it was confirmed that vortex center lines were successfully identified by the improved Stream Viewer. Moreover, it was also shown that the evaluation accuracy of gas entrainment was expected to be improved by considering distribution of pressure decrease along vortex center line.
Matsushita, Kentaro; Fujisaki, Tatsuya*; Ezure, Toshiki; Tanaka, Masaaki; Uchida, Mao*; Sakai, Takaaki*
Keisan Kogaku Koenkai Rombunshu (CD-ROM), 26, 6 Pages, 2021/05
For the gas entrainment vortex at the free surface in sodium-cooled fast reactors, development of the numerical analysis method to evaluate amount of the gas entrainment from the free surface has been developing. In this paper, the automatic creation of analysis meshes which can suppress the calculation cost while maintaining the prediction accuracy of the vortex shape is investigated, and the adaptive mesh refinement (AMR) method is examined to the creation of analysis mesh applying to the unsteady vortex system. The refined mesh based on the criterion evaluated by vorticity, Q-value as second invariant of the velocity and the discriminant for the eigen equation of the velocity gradient tensor is considered, and it found that the AMR method based on Q-value can refine the analysis meshes most efficiently.
Araki, Shohei; Gunji, Satoshi; Tonoike, Kotaro; Kobayashi, Fuyumi; Izawa, Kazuhiko; Ogawa, Kazuhiko
Proceedings of European Research Reactor Conference 2020 (RRFM 2020) (Internet), 7 Pages, 2020/10
Critical experiments of thermal neutron system are still expected to be playing an important role for wide technical issues. The Japan Atomic Energy Agency (JAEA) is renovating the Static Experimental Critical Facility (STACY) to maintain the experimental capability. The new STACY is designed as a general-purpose criticality facility. Its core mainly consists of low enriched UO
fuel rods, grid plates, and light water moderator. The first experiment campaign in the new STACY aims to obtain criticality characteristics of fuel debris, which will be used in validation of criticality analysis methods. The designs of the experimental core configurations are in progress.
Izawa, Kazuhiko; Ishii, Junichi; Okubo, Takuya; Ogawa, Kazuhiko; Tonoike, Kotaro
Proceedings of 11th International Conference on Nuclear Criticality Safety (ICNC 2019) (Internet), 9 Pages, 2019/09
Japan Atomic Energy Agency, JAEA, is conducting the renewal program of the heterogeneous water moderated critical assembly STACY (Static Experiment Critical Facility) in order to verify the criticality calculation considering fuel debris which have been produced in the accident of Fukushima Daiichi Nuclear Power Station. The first criticality of the new STACY is scheduled at the beginning of 2021. After the first criticality, it is necessary to perform a series of critical experiments with a series of basic experimental core in order to gain a proficiency of operators and grasp the uncertainty that accompanies the result of critical experiments in STACY. Prior to the construction of the new STACY, a series of neutronic calculation was carried out for licensing and planning first series of critical experiment. In this paper, possible core configuration of the basic experimental core and their limitations are discussed and presented.
Gunji, Satoshi; Tonoike, Kotaro; Izawa, Kazuhiko; Sono, Hiroki
Progress in Nuclear Energy, 101(Part C), p.321 - 328, 2017/11
Times Cited Count：3 Percentile：28.82(Nuclear Science & Technology)Criticality safety of fuel debris, particularly MCCI (Molten-Core-Concrete-Interaction) products, is one of the major safety issues for decommissioning of Fukushima Daiichi Nuclear Power Station. Criticality or subcriticality condition of the fuel debris is still uncertain; its composition, location, neutron moderation, etc. are not yet confirmed. The effectiveness of neutron poison in cooling water is also uncertain for use as a criticality control of fuel debris. A database of computational models is being built by Japan Atomic Energy Agency (JAEA), covering a wide range of possible conditions of such composition, neutron moderation, etc., to facilitate assessing criticality characteristics once fuel debris samples are taken and their conditions are known. The computational models also include uncertainties which are to be clarified by critical experiments. These experiments are planned and will be conducted by JAEA with the modified STACY (STAtic experiment Critical facilitY) and samples to simulate fuel debris compositions. Each of the samples will be cladded by a zircalloy tube whose outer shape is compatible with the fuel rod of STACY and loaded into an array of the fuel rods. This report introduces a study of experimental core configurations to measure the reactivity worth of samples simulating MCCI products. Parameters to be varied in the computation models for the experimental series are:(1) Uranium dioxide with 
U enrichments of 3, 4, and 5 wt.%; (2) Concrete volume fraction in the samples of 0, 20, 40, 60, and 80%; and (3) Porosity of the samples filled from 0 to 80% where the sample void is filled with water. It is concluded that the measurement is feasible in both under- and over-moderated conditions. Additionally, the required amount of samples was estimated.
Izawa, Kazuhiko; Tonoike, Kotaro; Leclaire, N.*; Duhamel, I.*
Proceedings of International Conference on Nuclear Criticality Safety (ICNC 2015) (DVD-ROM), p.965 - 976, 2015/09
In the post-Fukushima prospect, Japan Atomic Energy Agency, JAEA, intends to re-open its Static Experiment Critical Facility STACY, in order to contribute to the validation of fuel debris calculations in conditions close to those affected by the Fukushima Daiichi Nuclear Power Station accident. The reactor core of STACY is being modified by JAEA from homogeneous solution fuel core to heterogeneous pin-type fuel core. The first step of critical experiments is to establish reference experiments involving lattices of UO
rods without fuel debris. A design of such experiments is in progress for the widest range of moderation ratios in the frame of JAEA/IRSN collaboration. For that purpose, perturbation calculation technique and stochastic geometry modeling technique were used with the MCNP5 and the JENDL-4.0 evaluated nuclear data library. The proposed paper will discuss all the aforementioned issues.
Ikeda, Yoshitaka; Umeda, Naotaka; Akino, Noboru; Ebisawa, Noboru; Grisham, L. R.*; Hanada, Masaya; Honda, Atsushi; Inoue, Takashi; Kawai, Mikito; Kazawa, Minoru; et al.
Nuclear Fusion, 46(6), p.S211 - S219, 2006/06
Times Cited Count：59 Percentile：87.2(Physics, Fluids & Plasmas)Recently, the extension of the pulse duration up to 30 sec has been intended to study quasi-steady state plasma on JT-60U N-NBI system. The most serious issue is to reduce the heat load on the grids for long pulse operation. Two modifications have been proposed to reduce the heat load. One is to suppress the beam spread which may be caused by beamlet-beamlet interaction in the multi-aperture grid due to the space charge force. Thin plates were attached on the extraction grid to modify the local electric field. The plate thickness was optimized to steer the beamlet deflection. The other is to reduce the stripping loss, where the electron of the negative ion beam is stripped and accelerated in the ion source and then collides with the grids. The ion source was modified to reduce the pressure in the accelerator column to suppress the beam-ion stripping loss. Up to now, long pulse injection of 17 sec for 1.6 MW and 25 sec for 
1 MW has been obtained by one ion source with these modifications.
Kikuchi, Mitsuru; Tamai, Hiroshi; Matsukawa, Makoto; Fujita, Takaaki; Takase, Yuichi*; Sakurai, Shinji; Kizu, Kaname; Tsuchiya, Katsuhiko; Kurita, Genichi; Morioka, Atsuhiko; et al.
Nuclear Fusion, 46(3), p.S29 - S38, 2006/03
Times Cited Count：13 Percentile：41.76(Physics, Fluids & Plasmas)The National Centralized Tokamak (NCT) facility program is a domestic research program for advanced tokamak research to succeed JT-60U incorporating Japanese university accomplishments. The mission of NCT is to establish high beta steady-state operation for DEMO and to contribute to ITER. The machine flexibility and mobility is pursued in aspect ratio and shape controllability, feedback control of resistive wall modes, wide current and pressure profile control capability for the demonstration of the high-b steady state.
Tsuchiya, Katsuhiko; Akiba, Masato; Azechi, Hiroshi*; Fujii, Tsuneyuki; Fujita, Takaaki; Fujiwara, Masami*; Hamamatsu, Kiyotaka; Hashizume, Hidetoshi*; Hayashi, Nobuhiko; Horiike, Hiroshi*; et al.
Fusion Engineering and Design, 81(8-14), p.1599 - 1605, 2006/02
Times Cited Count：1 Percentile：9.98(Nuclear Science & Technology)no abstracts in English
Sakamoto, Yoshiteru; Toi, Kazuo*; Fukuda, Takeshi*; Fukuyama, Atsushi*; Fujita, Takaaki; Ogawa, Yuichi*; Takizuka, Tomonori; Takenaga, Hidenobu; Yagi, Masatoshi*; Yamada, Hiroshi*; et al.
Purazuma, Kaku Yugo Gakkai-Shi, 81(8), p.626 - 627, 2005/08
no abstracts in English
Kawano, Yasunori; Kawahata, Kazuo*; Kusama, Yoshinori; Sasao, Mamiko*; Sugie, Tatsuo; Mase, Atsushi*; Asakura, Nobuyuki; Kato, Takako*; Takamura, Shuichi*; Tanabe, Tetsuo*; et al.
Purazuma, Kaku Yugo Gakkai-Shi, 81(2), p.128 - 130, 2005/02
no abstracts in English
Takase, Kazuyuki; Yoshida, Hiroyuki; Ose, Yasuo*
Hai Pafomansu Komputingu To Keisan Kagaku Shimpojium (HPCS 2005) Rombunshu, P. 16, 2005/01
no abstracts in English
discharges and real-time control of current profile in JT-60USuzuki, Takahiro; Isayama, Akihiko; Sakamoto, Yoshiteru; Ide, Shunsuke; Fujita, Takaaki; Takenaga, Hidenobu; Luce, T. C.*; Wade, M. R.*; Oikawa, Toshihiro; Naito, Osamu; et al.
Proceedings of 20th IAEA Fusion Energy Conference (FEC 2004) (CD-ROM), 8 Pages, 2004/11
no abstracts in English
Sakamoto, Yoshiteru; Toi, Kazuo*; Fukuda, Takeshi*; Fukuyama, Atsushi*; Fujita, Takaaki; Ogawa, Yuichi*; Takizuka, Tomonori; Miura, Yukitoshi; Yagi, Masatoshi*; Yamada, Hiroshi*; et al.
Purazuma, Kaku Yugo Gakkai-Shi, 80(8), P. 678, 2004/08
no abstracts in English
Matsukawa, Makoto; JT-60SC Design Team
IEEE Transactions on Applied Superconductivity, 14(2), p.1399 - 1404, 2004/06
Times Cited Count：4 Percentile：28.63(Engineering, Electrical & Electronic)no abstracts in English
Ishida, Shinichi; JT-60 Team; JFT-2M Group
Physics of Plasmas, 11(5), p.2532 - 2542, 2004/05
Times Cited Count：22 Percentile：57.92(Physics, Fluids & Plasmas)no abstracts in English
Minami, Ryutaro; Kobayashi, Noriyuki*; Sakamoto, Keishi; Kasugai, Atsushi; Takahashi, Koji; Imai, Tsuyoshi
JAERI-Research 2004-006, 17 Pages, 2004/03
JAERI-Research-2004-006.pdf:1.37MB
no abstracts in English
